Space completed using the one and only technology

with the sole aim to make the future happier and healthier.

Ceiling Cassette Type

4-way Cassette Type(ABS)(AFC-NC4 TYPE)

Features
  • Lightweight due to use of nylon as the main body material
  • Reduced work labor cost (reduced weight)
  • Increased durability and performance
  • Rigid design to minimize vibration
  • Power interruption compensation function
  • High head/low noise drain pump
  • Automatic filter replacement alarm function optional
  • Outdoor air introduction function optional
  • Individual blade angle control function optional
Air direction control using blade angle and individual control

You can control the blade angle by levels according to the installation environment, use conditions and user location and individually control each blade.

Turbo modeoptional

Airflow is smooth even in space where the ceiling is high.

Freezing and rupture prevention function

The piping circulation mode operates in linkage when the room temperature is not greater than 5℃ (hot water supply, circulation, automatic valve signal)

Drawings

Standard Specifications

Item Unit AFC-N03C4 AFC-N04C4 AFC-N05C4 AFC-N06C4 AFC-N08C4 AFC-N10C4
Capacity Capacity condition A B A B A B A B A B A B
Cooling capacity W 5,060 3,660 6,955 5,058 8,430 6,110 10,060 7,300 13,140 9,480 15,700 11,630
Kcal/h 4,350 3,150 5,980 4,350 7,250 5,250 8,650 6,280 11,300 8,150 13,500 10,000
Heating capacity W 9,400 5,930 12,680 8,100 15,580 9,830 18,610 11,630 24,420 15,180 29,075 18,030
Kcal/h 8,080 5,100 10,900 6,890 13,400 8,450 16,000 10,000 21,000 13,050 25,000 15,500
Flow rate ℓ/min 15.0 10.5 20.0 14.5 24.2 17.5 28.8 20.9 37.7 28.0 45.0 34.0
Loss of head mAq 3.4 2.5 5.6 3.1 8.6 3.5 3.0 2.3 5.2 3.0 7.4 4.2
Blower Type Single suction turbo type
Dimension mm Ø480
Air volume ㎥/min 13 17 20 22 28 34
Operate   Direct motor operate
Quantity EA 1
Motor Type Semi-sealed type (6 poles and class B insulation), BLDC Motor
Power consumption W 31 44 55 61 103 176
Quantity EA 1
Heat exchanger Type Multi-Pass  Cross  Finned  Tube(Super Slit  Fin)
Fin Pitch mm 2.1 1.8
Piping Inlet A   20A (PF 3/4")
Outlet A  20A (PF 3/4") 
Drain mm Ø16 (outer diameter)/drain up pump embedded type (8W)/head 1,200mm (based on the outlet)
Exterior materials Main body: nylon/Grille panel: ABS
Heat insulation and sound-absorbing material Poly Ethylene Foam + Styrofoam
Air volume control Turbo, high, middle, low, automatic remote controller (wired remote control optional)
Power Single phase/220V/60Hz
Air filter Vinyl chloride (water cleaning type)
Main body dimensions mm 843(W) x 843(D) × 258(H)
Grille panel dimensions mm 950(W) x 950(D) x 35(H)
Equipment weight Kg 22 25
1. Capacity condition A

The cooling capacity is for indoor air DB 27℃ and WB 21℃ and inlet water temperature 5℃, and the heating capacity is for indoor air 18℃ and inlet water temperature 80℃.

2. Capacity condition B

The cooling capacity is for indoor air DB 27℃ and WB 19.5℃ and inlet water temperature 7℃, and the heating capacity is for indoor air 21℃ and inlet water temperature 60℃.